Only works when shade limits have been already set
Copy & Paste from one remote to another
Setting a favorite position between the limits
Only works for Plugin Motors
Full program video includes pairing
Adjusting speed
Start on channel to copy
PRESS and HOLD program button on back for 1 Jog
Got to channel you want to copy to,
PRESS and RELEASE program button on the back and you will get 1 jog to confirm copy
Repeat for channels you want copied
Start with Original remote, select on the channel you want to copy
PRESS and HOLD program button on back of remote until you get 1 Jog
Got to new remote, make sure you are on channel you want programed
PRESS and RELEASE program button on back and you will get 1 Jog to confirm
Copy is complete.
Repeat steps for all channels you want copied to the new remote
Adjusting Limits
Move shade to Limit that needs to be adjusted
Press up & down at the same time
Shade will Jog
Move shade to desired new limit
Press My button, shade will jug limit has been changed
Hold reset button for 3 jogs, motor has been reset to factory settings
Press up and down at same time , shade will jog once paired
Check Motor direction
to adjust direction
press my button for 1 Jog
check to confirm change has been made
Press & hold motor head button until you get 1 jog
press an release motor button you will get 2 jogs, that confirms motor is in sleep mode
Press & Release Motor head button
Reset Motor to Factory settings
8 second out
8 seconds in
8 seconds out
then plug in, shade will jog and has been reset
also try 2-20-2 if 888 does not work
-If you are using same remote press progam button on back of remote for 2 jogs to clear Limits
Reset Motor to Factory settings
2 second out
10 seconds in
2 seconds out
then plug in, shade will jog and has been rest
We use cookies to analyze website traffic and optimize your website experience. By accepting our use of cookies, your data will be aggregated with all other user data.