1. Enter Programming Mode
- On the motor head: Locate the small program button (often recessed; you may need a paperclip).
- Press and hold the program button for about 2–3 seconds until the shade jogs (moves slightly up/down) and/or the motor LED blinks.
This means the motor is in programming mode.
2. Pair the Remote
- On the remote control, press the program button (usually on the back or under the battery cover) briefly.
- The shade should jog again, confirming the remote is now paired.
3. Set Upper & Lower Limits
- Move to Upper Limit
- Use the UP button to move the shade to your desired fully open position.
- Press STOP to halt.
- Hold UP + STOP together until the shade jogs.
- Move to Lower Limit
- Use the DOWN button to move to your desired fully closed position.
- Press STOP to halt.
- Hold DOWN + STOP together until the shade jogs.
- Save Limits
- Hold STOP for ~2 seconds until the shade jogs twice.
- Limits are now stored.
4. Reverse Motor Direction (if needed)
- If UP moves the shade down (or vice versa), hold UP + DOWN together for ~5 seconds until the shade jogs.
This reverses the motor direction.
5. Exit Programming Mode
- Press the motor’s program button briefly.
- The shade will jog, confirming programming is complete.